View SFH4110_1307600.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

GaAs-IR-Lumineszenzdiode (Mini Sidelooker) GaAs Infrared Emitter (Mini Sidelooker) SFH 4110
Wesentliche Merkmale Wellenlange der Strahlung 950 nm Enger Abstrahlwinkel Hohe Strahlstarke Geringe Auenabmessungen Gehausegleich mit Fototransistor SFH 3100 F Hoher Koppelfaktor in Lichtschranken in Verbindung mit SFH 3100 F * Hohe Zuverlassigkeit Anwendungen * * * * * * * Sender fur Lichtschranken Bandende Erkennung (z.B. Videorecorder) Datenubertragung Positionsuberwachung Barcode-Leser Messen/Steuern/Regeln" Munzzahler Bestellnummer Ordering Code Q62702-P5072 * * * * * *
Features * * * * * * Peak wavelength of 950 nm Narrow half angle High radiant intensity Small outline dimensions Same package as phototransistor SFH 3100 F High coupling factor in light barriers with SFH 3100 F * High reliability Applications * * * * * * * Emitter in photointerrupter Tape end detection (VCR e.g.) Data transmission Position sensing Barcode reader For control and drive circuits Coin counters
Typ Type SFH 4110
Gehause Package Klares Miniatur-Kunststoffgehause, seitliche Abstrahlung, Anschlusse im 2,54-mm Raster, Kathodenkennzeichnung: kurzer Anschlu Clear miniature plastic package, sidelooker, solder tabs 2.54-mm (1/10"), cathode marking: short lead
2001-02-22
1
SFH 4110
Grenzwerte (TA = 25 C) Maximum Ratings Bezeichnung Parameter Betriebs- und Lagertemperatur Operating and storage temperature range Sperrspannung Reverse voltage Durchlastrom Forward current Stostrom, tp = 10 s, D = 0 Surge current Verlustleistung Power dissipation Warmewiderstand Sperrschicht - Umgebung Thermal resistance junction - ambient Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Wellenlange der Strahlung Wavelength at peak emission Spektrale Bandbreite bei 50% von Imax Spectral bandwidth at 50% of Imax Abstrahlwinkel Half angle Aktive Chipflache Active chip area Abmessungen der aktiven Chipflache Dimensions of the active chip area Schaltzeiten, Ie von 10% auf 90% und von 90% auf 10%, bei IF = 20 mA, RL = 50 Switching times, e from 10% to 90% and from 90% to 10%, IF = 20 mA, RL = 50 Kapazitat, Capacitance VR = 0 V, f = 1 MHz Symbol Symbol peak Wert Value 950 55 9 0.0625 0.25 x 0.25 450/360 Einheit Unit nm nm Grad deg. mm2 mm ns Symbol Symbol Wert Value - 40 ... + 85 3 60 1 100 280 Einheit Unit C V mA A mW K/W
Top; Tstg VR IF (DC) IFSM Ptot RthJA
A LxB LxW tr, tf
Co
16
pF
2001-02-22
2
SFH 4110
Kennwerte (TA = 25 C) Characteristics (cont'd) Bezeichnung Parameter Durchlaspannung, Forward voltage IF = 20 mA, tp = 20 ms Sperrstrom, Reverse current VR = 3 V Gesamtstrahlungsflu, Total radiant flux IF = 20 mA, tp = 20 ms Temperaturkoeffizient von Ie bzw. e, IF = 20 mA Temperature coefficient of Ie or e, IF = 20 mA Temperaturkoeffizient von VF, IF = 20 mA Temperature coefficient of VF, IF = 20 mA Temperaturkoeffizient von , IF = 20 mA Temperature coefficient of , IF = 20 mA Symbol Symbol Wert Value 1.2 ( 1.4) Einheit Unit V
VF
IR
0.01 ( 1.0)
A
e
2
mW
TCI
- 0.55
%/K
TCV TC
- 1.8 + 0.3
mV/K nm/K
Strahlstarke Ie in Achsrichtung gemessen bei einem Raumwinkel = 0.01 sr Radiant Intensity Ie in Axial Direction at a solid angle of = 0.01 sr Bezeichnung Parameter Strahlstarke1) Radiant intensity1) IF = 20 mA, tp = 20 ms
1) 1)
Symbol Ie min
Werte Values 2.5
Einheit Unit mW/sr
Sonderselektion auf Anfrage. Special bin selection on request.
2001-02-22
3
SFH 4110
Relative Spectral Emission Irel = f ()
100 %
OHR01938
Radiant Intensity
Ie = f (IF) Ie 100 mA
OHF00369
Single pulse, tp = 20 s
e (100 mA)
10 0
Max. Permissible Forward Current IF = f (TA)
90
OHF00372
e
10 1
rel
F mA
70 R thJA = 280 K/W 60
80
60
50
10 -1
40
40
30
10 -2
20
20 10
0 880
920
960
1000
nm
1060
10 -3 -1 10
10 0
10 1
10 2 mA 10 3 F
0
0
20
40
60
80
C TA
120
IF = f (VF), Single pulse, tp = 20 s
F
10 4 mA 10 3
OHF00367
Forward Current
Radiation Characteristics rel = f ()
40 30 20 10 0 1.0
OHF00371
50
0.8
10 2
60
10
1
0.6
70
10
0
0.4
80
10
-1
0.2 0
90
10 -2 0 0.5 1 1.5 2 2.5 3 V VF 4
100
1.0
0.8
0.6
0.4
0
20
40
60
80
100
120
Permissible Pulse Power , Duty cycle D = parameter, TA = 25 C
10 1
OHF00373
F A
10 0
D = 0.005 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5
10 -1
10 -2 -5 10 10 -4 10 -3 10 -2 10 -1 10 0
s tP
10 2
2001-02-22
4
SFH 4110
Mazeichnung Package Outlines
0.5 (0.020) x 45
R 0.9 (0.035) R 0.7 (0.028)
Emitter/ Cathode
2.54 (0.100)
3.1 (0.122) 2.9 (0.114)
16.5 (0.650) 16.0 (0.630)
2.2 (0.087) 2.0 (0.079)
1.42 (0.056) 1.22 (0.048) 0.6 (0.024) 0.4 (0.016)
1.04 (0.041)
1.04 (0.041)
4.1 (0.161) 3.9 (0.154)
0.84 (0.033)
0.84 (0.033) 17.77 (0.700) 17.27 (0.680)
3.0 (0.118) 2.8 (0.110)
0.9 (0.035) 0.7 (0.028)
1.6 (0.063) 1.4 (0.055) 1.3 (0.051) 1.1 (0.043)
0.84 (0.033) 0.64 (0.025)
0.5 (0.020)
0.3 (0.012)
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2001-02-22 5
60
GEOY6976

▲Up To Search▲

Price & Availability of SFH4110

	To Download SFH4110 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .